Do your toilets, sinks, and tubs constantly have stains in them from your well water? If so, you might be tired of cleaning these fixtures each week, but stains are not the only problem hard water can cause in a home. Hard water can also affect your appliances, including your hot water heater. If you are experiencing problems with your hot water heater, the problems might be a result of your hard water. Here are three important things you should know about hard water and hot water heaters.

How Hard Water Effects Hot Water Heaters

Hard water is water that contains a high level of sediment. Sediment refers to minerals found in water, and common minerals people have with well water include lime, calcium, and magnesium. These minerals cause staining in plumbing fixtures and can affect the quality of your water. In addition, when water contains a high level of sediment, the sediment in the water can cause problems with water heaters.

When water enters your hot water heater, the purpose is for the device to heat the water and store it for use at a later point. As this happens, the sediment in the water will fall to the tank's bottom and will settle there. If you have an electric hot water heater, the sediment attaches to the heating element, which interferes with the water-heating process.

In either case, the sediment in the system will make it harder for the hot water heater to do its job. This will lead to inefficiency with the system, and this leads to higher energy bills. In addition, the buildup of sediment in the system can cause the system to stop working or experience premature failure.

Sediment from hard water will cause you to spend more money heating your water and maintaining your system.

How To Fix The Problem

If you have hard water, one of the best things you can do is install a water softener. A water softener removes most of the sediment from water, and this will reduce the amount of sediment that ends up in your hot water heater.

If you are currently experiencing problems with your hot water heater not working properly, you may want to call a plumber to fix it. The plumber is likely to begin the repairs by draining the tank, which simply means emptying out the water from the tank. This on its own will not fix the problem if sediment has caused the system to stop working, but it is still a necessary step.

The next step is flushing the system. To flush the system, the plumber will turn on the cold water to the system and will attach a hose to the valve located at the bottom of the tank. The purpose is to flush out the system with cold water as a way of removing the built-up sediment. This may fix the problem you are experiencing; however, there is also a chance one of the parts of the system may also need to be replaced, and the plumber will figure this out while repairing your system.

Ways To Maintain Your System

If you do not want to put a water softener in, you will need to learn how to flush your system so you can do this every three or four months. By doing this on a regular basis, you can keep your tank clean, and this will help it function properly.

In addition, you may want to turn the water temperature down a little. Hotter water will cause more buildup of sediment in your system. If you can turn the temperature down by a few degrees, it may help reduce the amount of sediment in your tank.

If you have any questions or problems relating to your hot water heater, you should contact a plumbing company to schedule an appointment for repairs. For more information, contact companies like StateWide Mechanical II Inc.